How to set up and pair your Belkin AUD006 with your device

The Belkin AUD006 can be used either through a wireless connection via Bluetooth® within a 30-ft connection range or wired connection using the 3.5-mm aux cable or USB-C® to USB-C cable.

Setting up your Belkin AUD006
Pairing a new device via Bluetooth
Pairing via aux cable
Pairing via USB-C to USB-C cable

Setting up your Belkin AUD006

1. Press the power button on the headset for 2 seconds.

2. On your mobile device, turn ON Bluetooth to begin searching for your device with the Bluetooth ID, SoundForm Inspire. Note that steps in enabling your Bluetooth may vary depending on your device's operating system.

3. Wait until the blue light flashes on your headset, which means that it is pairing with your device. The blue light will turn solid and then turn OFF, indicating that the headphone is now paired with your wireless device.

4. Test the volume of the headset using the control buttons.

Pairing a new device via Bluetooth

1. Press the power button on the headset for 3 seconds.

2. On your mobile device, turn ON Bluetooth to begin searching for your device with the Bluetooth ID, SoundForm Inspire. Note that steps in enabling your Bluetooth may vary depending on your device's operating system.

3. Wait until the blue light flashes on your headset, which means that it is pairing with your device. The blue light will turn solid and then turn OFF, indicating that the headphone is now paired with your wireless device.

4. Test the volume of the headset using the control buttons.

Pairing via aux cable

1. Connect one end of the aux cable to the aux port of the Belkin AUD006 to the aux cable port of another device.

2. Press the power button for 2 seconds.

Pairing via USB-C to USB-C cable

1. Connect one end of the USB-C cable to the USB-C port of the Belkin AUD006 to the USB-C port of another device.

2. Test the volume of the headset using the control buttons.