Restoring the Belkin AUZ002 to default factory settings

If you have made any changes to your WiFi or wish to move the Belkin SOUNDFORM™ CONNECT Audio Adapter with AirPlay 2, AUZ002 to a new network, you need to factory reset it. A factory reset will remove all saved settings on Belkin AUZ002 and return it to setup mode.

NOTE: Doing a factory reset does not remove the speaker from your HomeKit® Home. Removing the speaker from your HomeKit Home will be done separately. If you reset the device, this will erase the settings of the adapter, and it is not the same as rebooting your adapter.

Locating the reset button

The Reset button is located next to the USB-C® power port on your adapter. The button is recessed into the unit and will require a thin object such as a paperclip to press.

How to perform a factory restore with the physical button
How to perform a factory restore with the Belkin SOUNDFORM® app

How to perform a factory restore with the physical button

To restore the Belkin AUZ002, please ensure that it is plugged into a power outlet. You will need a small object such as a paperclip to push the reset button.

Step 1:
Press and hold the Reset button for 3 seconds.

Step 2:
The status light will begin to blink rapidly. At this point, release the button.

Step 3:
Once finished, the Belkin AUZ002 will reboot and begin blinking white slowly to indicate that it is back in setup mode.

How to perform a factory restore with the Belkin SOUNDFORM® app

If your adapter and smart device are still connected to the same WiFi, you can use the Belkin SOUNDFORM app to perform a factory restore.

Step 1:
Open your Belkin SOUNDFORM app.

Step 2:
Tap the Settings (gear) icon on the speaker you wish to restore.