NOTE: If you use an iPhone® 11 or iPhone 12 screen protector on an iPhone 13, you will not have full-screen coverage. If you use an iPhone 13 screen protector for an iPhone 11 or iPhone 12, you will possibly affect the sensors and not detect when your phone is close to your ear or block the camera and cause issues when you use Face ID®, FaceTime® or take selfies.
Step 1:
Before you start, wipe your screen with the enclosed microfiber cloth and remove any remaining dust using the dust removal sticker.
Before you start, wipe your screen with the enclosed microfiber cloth and remove any remaining dust using the dust removal sticker.
Step 2:
Remove the clear plastic insert of the Easy Align tray and place your phone into the Easy Align tray.
Step 3:
While holding up the screen protector, pull the black number 1 tab down and away.
Step 4:
Align the screen protector with your phone and carefully lower it from top to bottom.
NOTE: Make sure the green line on the number 2 tab aligns with the white arrows of the tray as you reach the bottom.
Step 5:
Pull the clear number 2 tab up to remove the lining.
Step 6:
Use the microfiber cloth to push out any bubbles for a flawless finish.
Step 7:
Remove your phone from the Easy Align tray.
Your phone should now be protected by the Belkin SCREENFORCE™ UltraGlass screen protector.
