The indicator lights at the front of the case will provide an approximation of the Belkin PAC002’s charge level. The number of lights lit corresponds to the following:
- Four lights – 100% charged
- Three lights – 75% charged
- Two lights – 50% charged
- One light – less than 25% charged
This article will show you how to charge the Belkin PAC001 and PAC002. Click the links below for specific instructions.
Charging your earbuds
Charging the case
Charging your earbuds
To charge your earbuds, open the case and place each earbud in its designated slot then close the lid. If the case has battery power remaining, you do not need to plug it in while charging your earbuds.
NOTE: Connecting your case to a power outlet while charging the earbuds will not increase the charging speed of the earbuds.
Charging the case
Wired charging
Step 1:
Connect the USB-C® to USB-A charging cable of your Belkin PAC001 or the micro-USB end of the connector of your Belkin PAC002 to the back of the charging case, below the lid hinge.
Step 2:
Connect the end of the connector to a power adapter or into the USB port of your computer.
Connect the USB-C® to USB-A charging cable of your Belkin PAC001 or the micro-USB end of the connector of your Belkin PAC002 to the back of the charging case, below the lid hinge.
Step 2:
Connect the end of the connector to a power adapter or into the USB port of your computer.
Step 3:
Wait for all four lights to turn ON. This indicates that it has been fully charged.
Wireless charging
NOTE: This method only applies to the Belkin PAC002, which is designed to work with most Qi-compatible chargers.
Step 1:
Place your case onto your Qi™-certified wireless charger. Make sure to position the case correctly.
NOTE: The Belkin PAC002 is designed to work with most Qi-compatible chargers.
Place your case onto your Qi™-certified wireless charger. Make sure to position the case correctly.
NOTE: The Belkin PAC002 is designed to work with most Qi-compatible chargers.
Step 2:
Wait for all four lights to turn ON. This indicates that it has been fully charged.
The case will change from charge mode to a trickle charge maintenance mode once it reaches 100%. This means it is safe to keep your case either plugged in (via wired charging) or on top of the charger (via wireless charging) even if it is fully charged.
You can remove the case from power at any time or any charge level. A lower charge level, however, will reduce the number of times you can recharge your earbuds before the case is out of power.
You can remove the case from power at any time or any charge level. A lower charge level, however, will reduce the number of times you can recharge your earbuds before the case is out of power.
