Belkin BE112234-10 Frequently Asked Questions

TABLE OF CONTENTS
 
 
FUNCTIONALITY
 

PRODUCT INFORMATION

1.  What is the Belkin 12-Outlet Surge Protector Phone/Ethernet/Coax Protection, 10 ft. Cord, BE112234-10?

The Belkin 12-Outlet Surge Protector Phone/Ethernet/Coax Protection, 10 ft. Cord, BE112234-10 safeguards your electronic devices from power surges and spikes.  It has six regular and six BlockSpace™ outlets that can accommodate large power adapters.  Each of the 12 outlets has a sliding safety cover to keep out dust and dirt.   
 
The surge protector’s coaxial protection safeguards cable and satellite connection for clear picture and sound.  Its phone line / ethernet protection also ensures open and continuous connectivity.  Also, its cord management lifts and locks to keep cables neat and tangle-free.


2.  What is the warranty period of the Belkin BE112234-10?

The Belkin BE112234-10 has a limited lifetime warranty.

3.  Does the Belkin BE112234-10 have a Connected Equipment Warranty (CEW)?

Yes, it has a CEW of up to $300,000.

4.  What are the plastic pieces over the AC outlets?

Each outlet features a sliding safety cover to keep dust, dirt, and other objects from entering the outlet.

5.  Does the Belkin BE112234-10 have any lights?

Yes.  This product has a green colored Protected light and a red colored Not Grounded light.

6.  What is the plastic piece at the end of the Belkin BE112234-10 for?

This is the cable management clip which can be used to help keep the cables plugged into the surge protector tangle-free.

HARDWARE INFORMATION

1.  What is the length of the AC cord?

The Belkin BE112234-10 has a 10 ft / 3 m AC cord.

2.  What type of plug is on the AC cord?

The Belkin BE112234-10 features a low profile, right angle, AC plug that helps reduce space requirements behind furniture.

3.  What is the wire gauge of the AC cord?

The Belkin BE112234-10 features a 14 gauge (14 AWG) cord.

4.  How many outlets does the surge protector have?

The Belkin BE112234-10 features a total of 12 AC outlets.

5.  Does the Belkin BE112234-10 have telephone connections?

Yes.  It has one input connector and two output connectors.

6.  Does the Belkin BE112234-10 have coaxial connections?

Yes.  It has one input connector and one output connector.

7.  What do the lights indicate?

See the table below for the light behaviors of your device.
 
LightColorFunctionality



Protected



Green
This light indicates that the devices connected to your surge protector are protected. 

It should always be lit whenever the surge protector is plugged in and turned ON.  If it is OFF, then your surge protector is no longer protecting your devices.


Not Grounded


Red
This light indicates that the surge protector is detecting a ground fault with your outlet and it is not properly grounded.

If this light is lit then there might be an issue with the wiring in your electrical outlet. 

8.  Does the Belkin BE112234-10 have a power switch?

Yes.  It is located near the AC outlet and will cut power to all outlets when turned OFF.

9.  Can the Belkin BE112234-10 be mounted on a desk or wall?

Yes.  There are mounting holes on the back of the surge protector.

COMPATIBILITY

1.  What type of devices can I plug in to the Belkin BE112234-10?

The Belkin BE112234-10 can protect multiple types of devices.   When connecting devices to the Belkin BE112234-10 you will need to check their power consumption ratings.  The Belkin BE112234-10 can handle a maximum of 15A / 1,800W of power draw.  If you exceed this limit, the surge protector will shut off. 

2.  Why are some outlets spaced farther apart than others?

The Belkin BE112234-10 has six regular outlets and six BlockSpace™ outlets.  The BlockSpace outlets can accommodate larger power adapters like oversized printer and charge plugs without blocking the other outlets.

FUNCTIONALITY

1.  What is the Joule rating of the Belkin BE112234-10?

It has a rating of up to 4,120 Joules. 

2.  What is the response time of the Belkin BE112234-10?

It has a response time of less than 1 nanosecond. 

3.  What is the clamping voltage of the Belkin BE112234-10?

It has a clamping voltage of UL 1,449 500V.

4.  What is the maximum spike current of the Belkin BE112234-10?

It has maximum spike current of 216,000 amperes.

5.  What is the AC rating of the Belkin BE112234-10?

It has an AC rating of 120V / 15A / 1,800W at 60 Hz.

Was this support article useful?

Additional Support Questions?
Search Again