Follow the steps below to know how to install the B2B137, depending on your HDMI device.
HDMI-F device
HDMI-M device
Before proceeding with the process, make sure of the following:
- Make sure that the connections are not loose.
- Make sure the video settings between your HDMI device and VGA device must match. You may need to manually set the same Refresh Rate and Resolution settings on your source and VGA device.
- If you are using a low-powered HDMI device, such as a Mac® books or an Amazon FireTV Stick, you may need to connect it to a power outlet using a Micro-USB cable and USB wall charger with 500 mA suggested minimum output.
NOTE: Cable and power supply are not included.
HDMI-F device
Follow the steps below if you have HDMI-F devices, such as an Apple TV.
Step 1:
Connect your HDMI female device using the included HDMI Male-to-Male adapter.
Connect your HDMI female device using the included HDMI Male-to-Male adapter.
Step 2:
Connect the audio cable to the 3.5 mm port on the adapter then and to your external audio speakers.
NOTE: The audio cable is included in the package.
Step 3:
Connect the B2B137 to your VGA device. The diagram below shows the ideal setup.
NOTE: VGA cables are not included.
HDMI-M device
Follow the steps below if you have HDMI-F devices, such as Chromecast.
Step 1:
Directly connect your HDMI male device to the B2B137.
Step 2:
Connect the audio cable to the 3.5 mm port on the adapter then and to your external audio speakers.
Connect the audio cable to the 3.5 mm port on the adapter then and to your external audio speakers.
Step 3:
Connect the B2B137 to your VGA device. The diagram below shows the ideal setup.
Connect the B2B137 to your VGA device. The diagram below shows the ideal setup.
NOTE: VGA cables are not included.
You have now connected your HDMI device with the Belkin B2B137 Universal HDMI TO VGA Adapter with Audio.
Click here to know more about Belkin B2B137 Universal HDMI TO VGA Adapter with Audio.
