With the Easy Align technology, putting your Belkin SCREENFORCE™ TemperedGlass Screen Protector on your iPad® becomes effortless and easy to master. Follow the instructions below to learn how.
NOTE: Actual device images may vary depending on the device you are using.
Step 1:
Remove and discard the inner lining of the tray to make room for your iPad.
Step 2:
Insert your iPad into the tray.
Step 3:
Wipe your iPad's screen with the microfiber cloth.
Step 4:
Remove any remaining dust using the dust removal sticker.
Step 5:
While holding the number 2 tab, remove the bottom lining with the number 1 tab.
Step 6:
Slowly lower the protector on to the screen from top to bottom while ensuring proper alignment.
Step 7:
Carefully slide a finger through the center in the direction indicated on the image below.
Step 8:
Remove the top lining by slowly peeling off the number 2 tab. Be careful not to remove the screen protector when taking off the top lining.
Step 9:
Remove the iPad from the tray.
Step 10:
Push out any air bubbles by pressing the microfiber cleaning cloth on the screen.
