Belkin Business Devices Frequently Asked Questions

TABLE OF CONTENTS
     
HARDWARE INFORMATION
 
Yes, the power is auto-switching 100–240V.
 
The length of the Belkin F1DC101H is 6 ft.
   
When the CAC reader is plugged into a computer, the generic driver set is pulled through by the OS.  Clients can then authenticate via the CAC reader with their network using a CAC or PIV card that has already been set up by their Information Security group.  Belkin sells the reader but does not sell the CAC / PIV smartcards.
 
In short, additional software is needed to program the card, not to operate the reader.  As for the software, it is best for them to talk to their IS group, as the software used will depend on the type of card used (CAC or PIV), as well as what they are using the card for, etc.
 
The products work with any USB-capable computer, including SUN.  If the SUN computer is not USB-enabled, an adapter is required.
 
The CAC reader would have to be used on the target server side (plugged directly into the computer in question, not the KVM).  The KVM itself does not have a USB port that will allow you to use one CAC reader across all connected servers.
 
GENERAL INFORMATION 
 
Yes, each port name can be customized.
 
Yes, the Belkin F1DN005U is compatible with Windows® 7.
 
Yes, the adjustable tabs hold your 7 to 11-inch tablet (and up to 12.9-inch on select iPad® models) securely above the staging area, while a rotating arm allows you to position it vertically or horizontally.
 
The Belkin EDC001 has a 1-year limited warranty.
 
Yes, the Belkin F1DN005U CAC reader is compatible with the specifications below:
 

• On-board flash for seamless firmware upgrades
• EMV 2000 Level 1 and PC / SC certification
• High communication speed performance
• Fully tested and compliant with all ISO 7816 smart cards in the market
• Fully tested and compliant with all major memory smart cards in the market
• Fully tested and compliant with the Department of Defense Common Access Card (CAC)
• Fully tested and compliant with the Department of Defense Secure Token
• CCID compliant
• Full speed USB (12 Mbps)
• Bus-powered
• T=0, T=1 protocol support
• Memory card support through SCM MCARD API
• Communication speed up to 344,105 bps (PPS, Fl parameter)
• Frequency up to 12 MHz (PPS, Dl parameter)
• Support ISO 7816 Class A and AB smart card
• One dual state green LED
• Cable:  1.5 m long with USB type A connector
• Power through the USB bus
• Dimensions:  equal to or lesser: 70 mm (L) x 70 mm (W) x 10 mm (7)
• Weight:  less than or equal to 60 grams
• FCC Class B part 15, cULus, CE, VCCI approved
• USB approved
• Microsoft® WHQL 2000, XP, Server2003 approved
• EMV 2000 Level 1 approved
• Compatible and interoperable with solicited zero-client terminals

 
No, they are designed for standard depth racks, as the console's depth is 27.5 ft.
 
No, they are designed for 4-post racks.  For 2-post racks, third-party adapter kits are required.
 
The rack console is 29 inches at its closed position (handle to the rear of the KVM).  When you pull the handle to extend the console portion forward to its furthest point, it is 48.5 inches.  So the total distance the rack console portion can be extended is 19.5 inches.
 
The cord of the Belkin F1DN005U is 6 ft in length.

10.  What are the KVM PP3.0 product models?

The following skus are the PP3.0 product models:

• F1DN104B-3
• F1DN104E-3
• F1DN104C-3
• F1DN104F-3
• F1DN108C-3
• F1DN116C-3
• F1DN108F-3
• F1DN104P-3
• F1DN104W-3
• F1DN104Q-3
• F1DN104K-3
• F1DN108K-3
• F1DN204M-3
• F1DN102K-3
• F1DN102F-3
• F1DN102N-3
• F1DN102V-3

11.  Do I need to install any drivers for Belkin F1DN008UTT and F1DN005U CAC readers?

No, Belkin F1DN008UTT and F1DN005U CAC readers don’t require any software or driver installation.  Once these are plugged in, drivers will be installed automatically.

12.  Does Belkin have support for Belkin F1DN008UTT and F1DN005U CAC readers?

For security reasons, Belkin does not support Belkin F1DN008UTT and F1DN005U CAC readers.  If you have questions, visit https://militarycac.com/.