How to Charge and Set Up Your SoundForm Bolt ‘Next Gen’ TWS Earbuds (AUC019) 

The SoundForm Bolt ‘Next Gen’ TWS Earbuds (AUC019) are designed for easy everyday listening. Before using the earbuds for the first time, fully charge the charging case and place both earbuds inside the case. Following the steps below will help ensure the earbuds are properly charged and ready for use. The LED indicators on the charging case can help you monitor the battery level at a glance. 

 

Steps to Charge and Store the Earbuds 

Step 1: Charge the Charging Case 

  1. Connect a USB charging cable to the charging port on the charging case. 

  1. Connect the other end of the cable to a USB power source. 

  1. Allow the charging case to charge until the battery reaches the desired level. 

Step 2: Check the Charging Case Battery Level 

The charging case LED indicator shows the remaining battery level: 

  • 100% – Fully charged 

  • 50%–99% – High battery level 

  • 25%–50% – Medium battery level 

  • Below 25% – Low battery level; recharge soon 

Step 3: Place the Earbuds in the Charging Case 

  1. Open the charging case lid. 

  1. Insert the left and right earbuds into their designated charging slots. 

  1. Ensure each earbud is properly seated and aligned with the charging contacts. 

Step 4: Close the Charging Case 

  1. Gently close the charging case lid. 

  1. The earbuds will begin charging automatically while stored inside the case. 

 

FAQs 

1. Do I need to charge the earbuds before first use? 

Yes. It is recommended to fully charge the charging case and place the earbuds inside the case before using them for the first time. 

2. How can I tell if the charging case battery is low? 

Check the LED battery status indicator on the case. A battery level below 25% indicates that the charging case should be recharged soon. 

3. Will the earbuds charge automatically when placed in the case? 

Yes. When the earbuds are correctly seated inside the charging case and the case has sufficient power, charging starts automatically. 

 

Helpful Tips 

  • Fully charge the charging case before initial use for the best experience. 

  • Always store the earbuds inside the charging case when not in use to keep them charged and protected. 

  • Ensure the earbuds are seated correctly in the charging slots to allow proper charging. 

  • Recharge the charging case before the battery level falls below 25% to avoid interruptions in charging the earbuds. 

  • Use a reliable USB power source and charging cable for optimal charging performance. 

 

Additional Support Questions?
Search Again