How to Pair Your Belkin SoundForm Isolate Buds (AUC017) with a Mobile Device 

The Belkin SoundForm Isolate Buds (AUC017) are designed for quick and easy Bluetooth pairing. By following the setup process, the earbuds will automatically enter pairing mode when removed from the charging case. Once paired, they can reconnect automatically to your device for future use. Follow the steps below to get started.

Pairing the Earbuds

AUC017 Belkin

Step 1: Remove the Protective Films

  1. Open the charging case.
  2. Remove any protective films or stickers from the charging contacts on the earbuds.
AUC017 Belkin

Step 2: Place the Earbuds in the Charging Case

  1. Insert both earbuds into their charging slots.
  2. Ensure they are seated correctly.
AUC017 Belkin

Step 3: Close the Charging Case

  1. Close the charging case lid completely.
  2. Wait a few seconds.
AUC017 Belkin

Step 4: Open the Charging Case

  1. Open the charging case again while leaving the earbuds inside.
  2. The earbuds will automatically power on and enter Bluetooth pairing mode.
AUC017 Belkin

Step 5: Confirm Pairing Mode

  1. Look for the LED indicators on the earbuds.
  2. The flashing LEDs indicate that the earbuds are ready to pair.

Step 6: Connect to Your Device

  1. On your smartphone or tablet, open Settings.
  2. Select Bluetooth.
  3. Turn Bluetooth ON.
  4. From the list of available devices, tap SoundForm Isolate Buds.
  5. Wait for the connection confirmation.

FAQs

1. Why can't I find "SoundForm Isolate Buds" in my Bluetooth device list?

Make sure the earbuds are out of standby mode and actively flashing, which indicates pairing mode. If needed, place them back in the case, close the lid, then reopen it and try again.

2. Do I need to pair each earbud separately?

No. The earbuds pair automatically and appear as a single Bluetooth device on your phone or tablet.

3. What should I do if the earbuds won't connect?

Turn Bluetooth off and back on, place the earbuds in the charging case for a few seconds, then repeat the pairing process. Also ensure the earbuds and charging case have sufficient battery power.

Helpful Tips

  • Keep the earbuds within 3 feet (1 meter) of the device during initial pairing.
  • If the earbuds were previously connected to another device, disconnect or forget the connection before pairing with a new device.
  • Keep the charging case charged to avoid connection and power issues.
  • For the best pairing experience, avoid areas with heavy wireless interference from other Bluetooth devices.
  • Once successfully paired, the earbuds should reconnect automatically when removed from the charging case.
Additional Support Questions?
Search Again